Use Photoshop for the Perfect Black and White Photo

Colour photography is now the norm, and is perfect for most situations; however, there are some times when you want the power and simplicity of a black and white photo.

Black and white photography requires a different set of skills to colour, as the picture is formed purely from areas of light and shade. These days, black and white film is increasingly hard to come by, and unless you’re lucky enough to have a specialist lab near you, you’ll find the sort of machine processing they do at “one hour” photo places leaves a lot to be desired when it comes to processing black and white film.

Many modern digital cameras have a dedicated black and white mode, but mostly they just desaturate the picture and make it look washed out. It often works out better to shoot in colour and convert the picture in Photoshop.

Of course, the easiest way of making a colour photo black and white in Photoshop is to convert the mode to grayscale (Image > Mode > Grayscale), but this does limit your options if you want to enhance the picture later on.

In traditional black and white photography, coloured filters are sometimes placed over the lens to create a dramatic contrast. This is done because hues that seem quite different in real life (in colour) can merge into one shade of grey when seen in monochrome. The intensity of the colours are the same, even though the actual colours are different.

For example, a blue sky with white clouds can appear weak and washed out in a black and white photograph. If you place a red filter over the lens, it will darken the blue sky and make the white clouds stand out more. This is because the red filter blocks the blue colour waves more effectively than it does colours that are nearer to red.

The great thing about Photoshop is it enables you to experiment and get the effect just right. The method I find works best involves keeping the picture in RGB mode, and adjusting one of the colour channels.

If you go to the Layers palette, click the Channels tab, then click on (say) the Red channel, you’ll see an image that resembles a red filter over the lens of a camera with black and white film. The darkening of the blue tinted areas will make a moody, sophisticated image. For comparison, click on the Green channel and then the Blue. The results will be surprising — and very different!

I like to then fine tune the result by adjusting the Levels. Keep your chosen channel selected, and then go to Image > Adjustments > Levels, and adjust the sliders until you get the desired result. Then be sure to save the picture as a new file to preserve your original.

Incidentally, if you apply this process to two channels at the same time, you can get some pretty stunning colour effects too!

Canon Deluxe Photo Backpack 200EG for Canon EOS SLR Cameras

• Bag fits two smaller SLR camera bodies, 3-4 lenses, and additional small accessories
• Constructed of waterproofed polyester and nylon
• Water repellant and urethane coated for extra durability
• Padded divider system for on-the-go organization; includes tripod straps on pack bottom
• Lightweight, with padded shoulder straps and back for comfortable use

Product Description
Made of rugged nylon Canon Deluxe Backpack 200EG holds up to 2 camera bodies, 4 lenses, plus accessories. Due to its lightweight construction it features a well-arranged divider system for a secure storage and an easy access, padded shoulder straps and a comfortable back padding. Add to this tripod carrying straps and a front webbing ideal for lashing light jacket, sweater, etc…. More >>

Canon Deluxe Photo Backpack 200EG for Canon EOS SLR Cameras

New 200AW Photo Video D SLR Digital Camera Sling Shoulder Backpack Bag Quick-Access Pad 200 AW

• Side 180 full access provides easy pack access even on the move.
• Foam-padded lower compartment with interior memory card pouch and mesh pocket for storing camera gear.
• Thickly padded upper compartment with built-in mesh pocket keeps personal/camera accessories.
• Extra-wide thickly padded sling shoulder strap distributes to weight distribution and transport comfort.
• Thickly padded back panel with airflow channels adds comfort and wicks away moisture; Curved, easy-grip compression handle.

Product Description
6 + back rain cover storage. A perfect combination of quick access and weather protection, this compact sling shoulder bag with 2 compartments takes an SLR with mid-range zoom lens attached, 3-4 extra lenses, cables and accessories. Fast-access front zipper pocket with inner organizer for cables, adaptors and small items. Removable padded Velcro camera dividers to protect camera gear. Additional stability strap provides optimum stability and balance. Attachment… More >>

New 200AW Photo Video D SLR Digital Camera Sling Shoulder Backpack Bag Quick-Access Pad 200 AW

Black and White Photo Conversion

Copyright © 2006 Peter Horner

Most images were produced in black and white for nearly a hundred years after the invention of photography, but now colour images have become commonplace. Creating strong three dimensional images on a piece of paper is one of the best attributes of black and white photography, as the effect can be more striking than with a colour photograph. Without the colour to distract us we become more aware of the subtle tones which can be found within a black and white image. In this article I will share the technique I use that will help you create beautiful, striking and moody black and white images from your colour photographs.

Digital cameras have a black and white mode but more information and detail will be recorded in colour, which will also create a higher quality printed image. This is why I always shoot in colour then convert images later. There are several ways of converting an image to black and white using Photoshop and many other image editing programs. You could simply desaturate the colours, but creating a black and white image with real tone and definition goes beyond this. Levels, curves and the Unsharp Mask can be used creatively with black and white conversion to provide further control over tones and contrast to create a stunning image.

Channel Mixer – I have found that using the Photoshop Channel Mixer is the easiest way to convert an image to black and white and produces the best results. The Channel Mixer allows you to control how much red, green and blue contribute to the final monochrome image.

The Channel Mixer can be selected from the adjustment layer popup menu in the layers palette or you can also access it from under the image menu.

Clicking on the left tick box entitled Monochrome will convert your photograph into a greyscale image, and gives you the ability to blend the red, green and blue channels. Adjust each of the sliders to produce an image to your liking. As a rule make sure that the total values for each channel adds up to 100%. This creates monochrome images that are the equivalent of ones shot on black and white film through red, green or blue filters. For example if you wanted to maximize cloud contrast in a blue sky, then a red filter would achieve this. I usually set the red channel to 0 and the green channel to 100 to cut down on the amount of noise, or sometimes a combination of red and green depending on the image.

Curves and Levels – Brightness and contrast can be adjusted in Photoshop by using the curves and levels tools, which can be found under Image > Adjustments Curves/Levels. Both curves and levels allow you to adjust the tonal range of an image. When using the levels command you can make adjustments to just three variables, highlights, shadows and midtones. I prefer to use curves as it gives you more precision. With curves you can adjust any point along a scale while keeping up to 15 other values constant. By adjusting the black point and white point in curves you can give your image more contrast. At opposite ends of the diagonal line you will find a small dot. When you grab hold one of the dots with your mouse and drag it around you will see the image change. To create more contrast drag the black point lower and the white point higher, so that either end of the diagonal line is curved. Practice using curves and levels and explore the different effects you can achieve with your images.

Unsharp Mask – The Unsharp Mask is my preferred tool for sharpening images, which can be found under Filter > Sharpen > Unsharp Mask. It is a traditional film compositing technique used to sharpen edges in an image and corrects blurring. The Unsharp Mask locates pixels that differ from surrounding pixels by the threshold you specify and increases the pixels’ contrast by the amount you specify. In order to get the look which I desire in my images I use the Unsharp Mask twice. I begin by using a high radius and lower amount, such as a radius of 50 pixels and an amount of 30%. This gives the image a much more intense look and details will stand out. The second time I use a lower radius of 1 pixel with a higher amount of 30%, which will correct any blurring and sharpen the image.

Visit this page to view examples of images created using a combination of these techniques – Black and White Conversion Example Photos